Hello, before upgrade from, for example, r80.40 to r81.10, the first step is use "vsx_util upgrade" utility from SMS/MDM.
This info is clear and indcated in the "Installation and Upgrade Guide R81" document.
In the VSX R81 Admin Guide, about "vsx_util upgrade" is also indicated: "After the command finishes, you must run the vsx_util reconfigure command".
This part isn't indicated in the "Installation and Upgrade Guide R81" document.
About your experience, "vsx_util upgrade" is sufficent or, after this, we need to use also "vsx_util reconfigure"?