Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Cristian_F_CCSM
Contributor
Contributor
Jump to solution

Info about VSX upgrade to R81.x

Hello, before upgrade from, for example, r80.40 to r81.10, the first step is use "vsx_util upgrade" utility from SMS/MDM.

This info is clear and indcated in the "Installation and Upgrade Guide R81" document.

In the VSX R81 Admin Guide, about "vsx_util upgrade" is also indicated: "After the command finishes, you must run the vsx_util reconfigure command".

This part isn't indicated in the "Installation and Upgrade Guide R81" document.

About your experience, "vsx_util upgrade" is sufficent or, after this, we need to use also "vsx_util reconfigure"?

Thanks

0 Kudos
1 Solution

Accepted Solutions
Alex-
Advisor
Advisor

vsx_util upgrade will upgrade the database on the management station.

After this, you need to upgrade your VSX appliances. vsx_util reconfigure is run in the case you have a freshly installed appliance with the corresponding physical interfaces configured (bonds for instance) to convert to VSX. If you go with in-place upgrade running CPUSE, you won't need to reconfigure them.

Beware you need to manually re-input extra VS configuration like DHCP relays or dynamic routing, only done on CLI.

View solution in original post

5 Replies
Alex-
Advisor
Advisor

vsx_util upgrade will upgrade the database on the management station.

After this, you need to upgrade your VSX appliances. vsx_util reconfigure is run in the case you have a freshly installed appliance with the corresponding physical interfaces configured (bonds for instance) to convert to VSX. If you go with in-place upgrade running CPUSE, you won't need to reconfigure them.

Beware you need to manually re-input extra VS configuration like DHCP relays or dynamic routing, only done on CLI.

genisis__
Leader Leader
Leader

Additionally the very first thing:

- snapshot the Management server

- snapshot the VSX appliances

and if possible store these offline.  If you need to rollback then you will need to do a snapshot restore.

Cristian_F_CCSM
Contributor
Contributor

OK, thanks, is clear and logic.

0 Kudos
Boaz_Orshav
Employee
Employee

Hi

  Notice that it is much easier to use the Smart Console in order to upgrade your VSX

  You can upload the new version to the management (Manage & Settings -> Package repository -> New and then either download from download center or brose the package)

  Then simply right click the VSX and select actions -> version upgrade

  No need to do vsx_util upgrade nor reconfigure. The Smart Console shall do it for you.

 Boaz

0 Kudos
Cristian_F_CCSM
Contributor
Contributor

Hello, thanks for reply.

With this procedure (upgrade via Smart Console) we can opgrade only the enteire cluster, correct?

If I need to use MVC the only way at the moment is "legacy" mode via CPUSE, can you confirm?


Thanks

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events