cancel
Showing results for 
Search instead for 
Did you mean: 
Post a Question
J_Saun
J_Saun inside Developers (API / CLI) 4 hours ago
views 204 4

Where used query by IP address

Is there a way in R80 to query where an object is used by IP ADDRESS rather than by name?Additionally, I'd like to be able to script it so that you are promoted for the IP and then the query runs and returns the results.
Derek_Gottwalt
Derek_Gottwalt inside Developers (API / CLI) yesterday
views 214 3

Ansible Playbook Config information or Health Check

I am looking to see if anyone has already created a Ansible Playbook that goes out and gets configuration information or can do a health check from either Security Gateways Or Security Management Servers. Currently using R80.10 But also if there i...
Maarten_Sjouw
Maarten_Sjouw inside Developers (API / CLI) yesterday
views 49 3

GAIA REST API: Does it support Dynamic route settings?

Does the GAIA REST API support setting / getting the Route redistribution settings for Dynamic routing. Currently when you need to redistribute 200 static routes, it is a lot of clicks in the WEB-UI In the old IPSO days you were presented a list o...
qw
qw inside Developers (API / CLI) yesterday
views 36

Change User Details via API in R80.20

Hi guys,In many users I would like to change the Source under Location at the same time with the API. So far, each of my users has its own source, but this should be deleted and a whole network to be added to each user. So far, I have not found a ...

SmartMove Error failed to convert Juniper ScreenOs configuration

Hi Team, I am trying to convert the Juniper configuration using Smartmove but encountered the error. Refer to the error message posted below:Could not parse configuration file.Message: Input string was not in a correct format.Module: mscorlib...
Jin_Zhou
Jin_Zhou inside Developers (API / CLI) a week ago
views 155 2

Find out if an object exists for a network with mgmt_cli

I am trying to find out if an object exists for a network with exact match. But "mgmt_cli show objects" gives more than I wanted. For example I need to find if an object exist for network "52.0.0.0/15" exist. I tried the following.mgmt_cli show ob...
Danny
Danny inside Developers (API / CLI) a week ago
views 702 3

How to check if Anti-Spoofing is enabled and set to Prevent mode for each interface on CLI?

Which CLI command will let me know if each interface has Anti-Spoofing enabled and set to Prevent mode?This command is not specific enough: fw ctl get int fw_antispoofing_enabled
Yasushi_Kono1
Yasushi_Kono1 inside Developers (API / CLI) a week ago
views 113 7 3

Automation Specialist : REST API Demo Tool not working

I am wondering whether you encountered the same issue: The REST API Demo Tool shows a lot of error messages while attempting to run it. Mostly, the error is similar to "Microsoft JScript Compilation error". So, could you please provide us with the...
J_Saun
J_Saun inside Developers (API / CLI) 2 weeks ago
views 699 3 2

Show total number of objects in database

Is there a way from either the command line or in the gui to show the total number of objects in the objects_5_0.C file? Specifically for R65 and R77. Thx
Aathi
Aathi inside Developers (API / CLI) 2 weeks ago
views 124 4 1

Checkpoint rule creation through ansible playbook

HI Team, we are automating checkpoint firewall rule creation through ansible playbook.in that we are able to create a new rule base.facing difficulties to add the source/destination ,ports in existing rule base.Can you please let me know how ...
Aathi
Aathi inside Developers (API / CLI) 2 weeks ago
views 634 3 1

Enable the access rule to correct-policy package

Hi Team,  i am adding the rulebase via ansible  and having 2 policy package like "standard and Test_APP" policy package.whatever rule in publishing its going to standard only not going to APP policy  package.is there any way to...
Danny
Danny inside Developers (API / CLI) 2 weeks ago
views 627 1

How to check if Anti-Bot / Anti-Virus are set to Detect only on CLI ?

Which CLI command will show me if Anti-Bot / Anti-Virus are set to Detect only ?
Sergio_lopez
Sergio_lopez inside Developers (API / CLI) 2 weeks ago
views 59 7

problem exporting a policy

Hello guys, im using the phyton tools, and i have a problem exporting a policy package, on the export operation it gives me this errorExporting Access Control layersExporting Access Layer [test Network]Failed to retrieve layer named 'test Network'...
Aathi
Aathi inside Developers (API / CLI) 2 weeks ago
views 245 14 1

Gateway First-time wizard through Ansible Playbook

Hi Team, I am trying to automate the gateway first time wizard  through ansible .while connecting the gateway from ansible i am getting the below error. hostfile:Gaia:vars]ansible_connection=sshansible_ssh_user=adminansible_sudo_pas...
J_Saun
J_Saun inside Developers (API / CLI) 2 weeks ago
views 261 3 1

Checkpoint automation - many questions

Just starting to get into automating configuration tasks on Checkpoint R80. I have installed cpAnsible on a CentOS that has python running and did a simple group and object add which worked fine My questions:- Is Ansible just running built in...