Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Rabindra_Khadka
Contributor

I have problem with login checkpoint r77.30 webui and dashboard

I just recently install checkpoint r77.30 in standalone VM from the backup files. I can access my cli and it shows previous configuration yet i can't access webui and smart dashboard. 

1. I reboot the machine and just for 5 -10 seconds i can access webui and after that it goes off. i can't ping 

2. i tried with different vlan network and yet while i reboot i can access for 5-10 minutes then it goes 

What could be the possible problem. Have you face that problem before or do you have any idea about it.

Help me Please, i need to extract that previous file

3 Replies
PhoneBoy
Admin
Admin

This should go in General Product Topics‌.

Was your management appropriately licensed when you did the backup?

Does your VM have the same IP address as the original?

If not, you probably don't have a license and, as a result, the product is blocking all traffic.

Apply an appropriate evaluation license.

Refer to: How to Request an Evaluation License

0 Kudos
Myo_Min_Zaw
Contributor

Thanks. Dameon.

Yes. IP address is the same.

I will try to apply for eval license and try it out again one more time.

0 Kudos
Timothy_Hall
Legend Legend
Legend

Try running fw unloadlocal and see if that allows you to access the web interface again.  Sounds like something was not set up properly and the derived IntitialPolicy is blocking you.

--
Second Edition of my "Max Power" Firewall Book
Now Available at http://www.maxpowerfirewalls.com

Gateway Performance Optimization R81.20 Course
now available at maxpowerfirewalls.com

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events