Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
carl_t
Contributor

cpu and memory alerts ?

Hi All

Is it possible to configure CPU and memory alerts on my firewalls?

last week we had an issue with the memory on one of my firewalls and we had to reboot, some automatic alerting could have helped.

Is this possible?

Cheers

0 Kudos
3 Replies
Rohit_Raut
Participant

Yes, It is possible.From Logs & Monitor go to click on smartview. SmartView Monitor window will launch. In that click on thresholds configuration.

Refer: https://sc1.checkpoint.com/documents/R76/CP_R76_SmartViewMonitor_AdminGuide/17664.htm#o17686

monitor.PNG

0 Kudos
carl_t
Contributor

Hi

What does the alert function actually do?

0 Kudos
Timothy_Hall
Legend Legend
Legend

CPU usage alerts can be configured from the old-school SmartView Monitor application, from the Gateway Status screen, right click any gateway and select Configure Thresholds, then Edit Global Settings:

 

CPUalerts.png

 

The easiest way to get memory alerts is to ensure Aggressive Aging is configured, and set it to alert.  The default threshold for alerting is 80% memory utilization which can be adjusted on the Advanced screen; because most non-VSX firewalls these days are set to automatically increase the connection table size, Aggressive Aging only triggers on excessive memory utilization (sk122154: How is Aggressive Aging enforced when Concurrent Connections Capacity Limit is calculated ...😞

 

AggressiveAging.png

How and where the alerts are sent is configured from the Global properties, see here for an example: sk25941: Configuring 'Mail Alerts' using 'internal_sendmail' command

 

Gateway Performance Optimization R81.20 Course
now available at maxpowerfirewalls.com
0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events