Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
rdinata01
Explorer

Recover historical cpu after upgrade

Hello All,

Btw anyone know how to recover historical resource like cpu usage/mem on checkpoint firewall appliance 5K series after upgrade from R80.30 to R80.40, because we just upgrade on last month, but we need historical usage from last year.
we have snapshot before upgraded, can we recover it ? , Or may be if it not possible, is there any link for documentation ?

This is last historical is stuck since fw installed

history.html.jpg

Thanks

0 Kudos
7 Replies
Chris_Atkinson
Employee Employee
Employee

I'm not aware of a way to recover this data into the local DB off-hand, but what method was used to perform the upgrade?

Maybe consider using an external SNMP monitoring solution and or investigate Skyline moving forward.

CCSM R77/R80/ELITE
0 Kudos
rdinata01
Explorer

Hi Chris,
Btw we use CPUSE upgrade from Gaia to upgrade from R80.30 to R80.40
And related snmp, we already monitor , but still same like on checkpoint devices, only show after upgrade
Btw do you have some link, or document for us to use as reference, thanks

0 Kudos
Wolfgang
Authority
Authority

If you recover your snapshot you can use the historical view of cpview, but this shows only the last 30days.

Or maybe you have a cpinfo from the old system, cpview data will be there.

Another way ..... restore your old snapshot on another hardware connect with a clone of your management and retrieve the historical data via SmartviewMonitor.

0 Kudos
rdinata01
Explorer

Hi Wolfgang,

Btw currently we are looking for 1y historical , and still looking for possibility to recover from snapshot. and from your experience so we are still possible to access with snapshot right ?

0 Kudos
Wolfgang
Authority
Authority

@rdinata01 I think this  should work with a gateway recovered from the snapshot. The historical data is saved on the gateway and retrived from them if you request it via from SmartviewMonitor.

0 Kudos
G_W_Albrecht
Legend Legend
Legend

You can copy files from snapshots - see here : https://community.checkpoint.com/t5/General-Topics/Mounting-snapshots/m-p/146129#M25708

 

CCSE / CCTE / CTPS / CCME / CCSM Elite / SMB Specialist
0 Kudos
PhoneBoy
Admin
Admin

Perhaps the data did come across and there's a different issue at hand.
Recommend engaging with the TAC on this.

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events