Checkpoint VSX static route with different priority

[Lyaofei]

Hi All, 

Need your advice on this, for Checkpoint VSX is it possible to add the static route for the same destination with a different priority?

In my environment, I will need to add the route below

For example

Destination 10.10.10.0/24 Gateway 1.1.1.1 priority 1

Destination 10.10.10.0/24 Gateway 2.2.2.1 priority 2

So far I do not find any option in the Smartconsole, or can I use the CLI command to add the route with a different priority instead using Smartconsole?

Thank You

[Chris_Atkinson · Accepted solution]

This isn't currently possible on VSX. If you need this please discuss an RFE with your local CP SE.

[Sergei_Shir]

This SK article was updated to show that multiple Static Routes with different priorities to the same destination are not supported:

sk79700 - VSX supported features