Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Marcin_
Explorer

SMB 1570 R81.10.05 How to migrate locally managed configuration to management server?

Dear All,

 

Can you please advise how to transfer configuration of locally managed gateway into clean installation of management server?

Both installations are 81.10 versions.

The most important configuration for me is the network topology and VPN conf. 

I'm out of the office and wondering what is going to happen when I change configuration from locally managed to central one.

My guess is that I would be cut off from vpn connection and network topology would go to factory defaults if there is no configuration in management server done in advance?

 

I'd appreciate any input 🙂

 

Best regards,

Marcin

0 Kudos
3 Replies
PhoneBoy
Admin
Admin

Unfortunately, I am not aware of a way to convert a local SMB management configuration to central management short of by-hand.

0 Kudos
the_rock
Legend
Legend

I recall customer doing this few years ago and what we ended up doing was save the config file, connected the device to the management, but then topology and all the config in dashboard had to be done manually. TAC told us there was no script sadly that could be used to make this less "painful" ; - )

0 Kudos
G_W_Albrecht
Legend Legend
Legend

There is no supported procedure for this - only possible manually. Usually, no one changes from local to central management...

This could be of some help though:

Configuration transfer between different SMB models

CCSE / CCTE / CTPS / CCME / CCSM Elite / SMB Specialist
0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events