- R80.40 MGMT server (open server VMWare).
- R80.40 Cluster XL (two GW's)
We faced today with error when we tried to install policy on CP cluster. We simply can not install security policy on cluster with an error:
Status: Failed - Policy installation failed on gateway. If the problem persists contact Check Point support (Error code: 1-2000245)
I can not find any official Check Point's SK regarding this particular error.
There is one SK with many R8X.XX errors, but not this particular one:
"Policy installation failed on gateway. If the problem persists contact Check Point support (Error c... In this SK there is following explanation under 34:
I opened SR along with policy report file from MGMT server (from picture above) but still no valid help from Check Point techical stuff.
We reverted back to one DB revision back (when all worked) - but an error is still in place, can not install policy.
We installed latest jumbo for r80.40 - take 120, but and an error is still there.
How to check if some object is locked in db for some strange reason? We tried with rebooting mgmt server no success.
We tried with rebooting both GW's and with failover, but again we made no success, an error is still in place.
Our GW's are with old jumbo, maybe it should be installed with take 120 too? I assume this is only MGMT side error.
All suggestions are welcome. Kindly feel free to comment this subject.