1st of all, i'm new to checkpoint, and i don't have much time for digging into it, hence the probably easy question i'm going to ask.
So, we've got this new firewall in our MPLS environment, R77.30 on open server.
Everything was more or less set up by our MPLS provider who has handed it over to us without much information.
So here's my issues.
We've added a new branch office wich is connected through the MPLS (i can reach it without issue from my office, so routing is ok inside the MPLS), however i can't reach it from the firewall.
my routing table is like this -and no other route-
10.0.0.0/8 > via 10.201.1.254
on the subnets in the range, that were created before, i can traceroute them to the next hop, on my new subnet (in 10.XXX.XXX.XXX too) i can't reach the next hop, also, i don't have the route populated in the vpn.
So obvisouly, i'm missing something there, i've tried to check documentation and forumq, but as a day to day sysadmin, i can't really have enough time to check toroughtly.
Coudl someone point me to the right direction or right documentation page ?