Good day everyone,
I have two 15400 running 3 virtual system. The systems has bgp setup to pair with 2 nexus switches running hsrp and vpc. Everything was fine until my network team had to run a patch on the nexus I have my system set up for vsls with one VS on one member gateway and the other VS on the second member gateway.
I noticed that i have successful bgp peering on one member and the second member is in active state.
I ran a debug on the firewall with following results
![](/legacyfs/online/checkpoint/73985_pastedImage_1.png)
I have tried to change the holdtime to 180 based on the output coming from this debug but still the same active state.
I would greatly appreciate any ideas. Thank You