VSX gaia configuration - interface configuration not there

[Jones]

Hey,

I have a VSX cluster on R81.10 Jumbo Take 78 and upgraded to 79. On both takes, when showing in clish the configuration, most of the interface configuration is not there anymore. I'm only seeing the Dedicated Management Interface and the bonding settings. The synchronization interface, the vlans, the ip-addresses, the wrp(j) information on is not shown any more with "show configuration" or "show configuration interface". This is true for all VS'es.

This indeed looks cleaner, but the synchronization interface configuration is important to have on VS0. 

I also have an VSX environment on Jumbo Take 45 that does not have this same behavior.

Can Check Point shine some light on this?

Kind Regards,

Eamon Jones 

[Chris_Atkinson]

Please refer to the discussion here and see if it helps you:

https://community.checkpoint.com/t5/Security-Gateways/VSX-R1-JHA-t72-Interfaces-not-visible-with-cli...

[Jones]

I also addressed the problem of not having a synchronization interface config anymore in the other thread.

Making it easier the restore a VSX is indeed a good idea, but don't forget important configuration settings.

[Jones]

On R81.10 Jumbo Take 87 (recommended), the synchronization interface is still not visible unfortunately.