Unable to access WebUI for TE250X

[anand14]

We are unable to access the WebUI for sandblast TE250X device.

Received device version is R77.30.

We have configured the IP address on computer 192.168.1.10 and trying to access https://192.168.1.1 but getting below error.

Can you please help for the same.

Hmmm… can't reach this page

192.168.1.1 refused to connect.

Try:

• Checking the connection
• Checking the proxy and the firewall

ERR_CONNECTION_REFUSED

TAC engineer tried below solution as well..

https://support.checkpoint.com/results/sk/sk178770

[Chris_Atkinson]

If the devices is not in production I would strongly recommend upgrading it via USB/Isomorphic to a supported version.