Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
the_rock
Legend
Legend
Jump to solution

Restoring config from 1100 into 1500 appliance

Hey guys,

Just wondering if this is even possible, as I dont deal much with these SMB appliances too often. Is it even possible to restore the config from 1100 into 1500 appliance? Not sure what new 1500 is running, but I believe 1100 is on R77.20.80 (latest firmware). If not, what if you were to generate show configuration on 1100 and then try copy that over to new 1500?

Any suggestions/ideas welcomed and appreciated : )

Cheers.

0 Kudos
3 Solutions

Accepted Solutions
PhoneBoy
Admin
Admin
0 Kudos
the_rock
Legend
Legend

My colleague and I ended up configuring 1530 from scratch and already latest firmware was installed (R80.20.15). We just licensed it from user center and also assigned same IP addresses and DHCP scope as current 1100, so they just need to be swapped and thats it. Thanks again for all the help as always!

View solution in original post

Steffen_Appel
Advisor

Retried it from 1120 to 1530 directly and it works!

View solution in original post

12 Replies
PhoneBoy
Admin
Admin
0 Kudos
the_rock
Legend
Legend

Thanks D. Would copying show config method work from 1100 to 1500?

0 Kudos
PhoneBoy
Admin
Admin

I suspect not, but haven't tried it myself.

0 Kudos
G_W_Albrecht
Legend
Legend

As i wrote in         Configuration transfer between different SMB model...               , this may work, but needs manual corrections. I would suggest to do the FTW, interface definitions and other simple tasks before using parts of the output file to reconstruct e.g. users or lists of defined objects.

CCSE CCTE CCSM SMB Specialist
the_rock
Legend
Legend

Thank you sir!

0 Kudos
the_rock
Legend
Legend

My colleague and I ended up configuring 1530 from scratch and already latest firmware was installed (R80.20.15). We just licensed it from user center and also assigned same IP addresses and DHCP scope as current 1100, so they just need to be swapped and thats it. Thanks again for all the help as always!

G_W_Albrecht
Legend
Legend

Latest firmware is R80.20.35 ! If the configuration does not contain many locally defined objects, configuring from scratch is the best way.

CCSE CCTE CCSM SMB Specialist
the_rock
Legend
Legend

Thanks for confirming firmware version brother, appreciated!

0 Kudos
Steffen_Appel
Advisor

It works if you have a 1400, so export from the 1100, import on 1400, then export there and import on 1500. Everything including SIC is preserved, only the Interfaces 6-8 get lost.

0 Kudos
Steffen_Appel
Advisor

Retried it from 1120 to 1530 directly and it works!

G_W_Albrecht
Legend
Legend

From which firmware to which ? Last updated information was sk170162: How to upgrade hardware from R77.20.87 to R80.20.15 or higher and did not include R77.20.80.

CCSE CCTE CCSM SMB Specialist
0 Kudos
Steffen_Appel
Advisor

Obviously from 77.20.80 to 80.20.35

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events