R8x Ports Used for Communication by Various Check Point Modules (new version 2.1)

[HeikoAnkenbrand]

Introduction

This drawing should give you an overview of the used R80, R81 ports respectively communication flows. It should give you an overview of how different Check Point modules communicate with each other. Furthermore, services that are used for firewall operation are also considered. These firewall services are also partially mapped as implied rules in the set on the firewall.

Overview

Download PDF

Download R8x version 2.0:
R8x Ports Used for Communication PDF

SmartConsole Extention

New!

Now I have developed a SmartConsole Extension so that you can view the overview directly in the SmartConsole.
In the Access Policy section in the upper area, there is a tab called "Ports for Modules". More infos here.

Extension URL: https://www.ankenbrand24.de/ex/ports.json

References

Support Center: Ports used by Check Point software 

Versions

Version 2.1:
+ v2.1b  all new R82 ports (IA + RA VPN ikev2)                                      10/29/2024
+ v2.1a  all new R81.20 ports (Cloudguard + VPN + ClusterXL)           07/15/2024

old Version 2.0:
+ v2.0f new! now with SmartConsole Extension                                02/13/2023
+ v2.0e add LOM port 2048                                                                         01/31/2023
+ v2.0d  add LOM ports                                                                               01/23/2023
+ v2.0c  new colors + design                                                                      01/22/2023
+ v2.0b  best mistake 🙂  SmartDashboard versus SmartConsole     01/22/2023
+ v2.0a correct names : SMS, MDS, SmartConsole, ...                          01/21/2023

old Version 1.9:
+ v1.9a  add port 443 cloud CME  19.03.2022
+ v1.9b  fix port issue 442 cloud CME  22.03.2022

old Version 1.8:
+ v1.8a R81.10 EA update 04.05.2021
+ v1.8b add port 18264 30.05.2021
+ v1.8c R81.10 upgrade 28.07.2021

old Version 1.7:
+ v1.7a R81 EA update 17.07.2021
+ v1.7b bug fix 20.08.2021
+ v1.7c bug fix + new download link 25.06.2021

old Version 1.6:
+ v1.6a add Azure ports 05.05.2020
+ v1.6b add all cloud ports 15.06.2020

old Version 1.5:
+ v1.5a typos corrected 18.09.2019
+ v1.5b port update 26.01.2020

old version 1.4:
+ v1.4a bug fix, update port 1701 udp L2TP 09.04.2018
+ v1.4b bug fix 15.04.2018
+ v1.4c CPUSE update 17.04.2018
+ v1.4d legend fixed 17.04.2018
+ v1.4e add SmartLog and SmartView on port 443 20.04.2018
+ v1.4f bug fix 21.05.2018
+ v1.4g bug fix 25.05.2018
+ v1.4h add Backup ports 21, 22, 69 UDP and ClusterXL full sync port 256  30.05.2018
+ v1.4i add port 259 udp VPN link probeing 12.06.2018
+ v1.4j bug fix 17.06.2018
+ v1.4k add  OSPF/BGP route Sync 25.06.2018
+ v1.4l bug fix routed 29.06.2018
+ v1.4m bug fix tcp/udp ports 03.07.2018
+ v1.4n add port 256 13.07.2018
+ v1.4o bug fix / add TE ports 27.11.2018
+ v1.4p bug fix routed port 2010 23.01.2019
+ v1.4q change to new forum format 16.03.2019

old version 1.3:
+ v1.3a new designe (blue, gray), bug fix, add netflow, new names 27.03.2018
+ v1.3b add routing ports, bug fix designe 28.03.2018
+ v1.3c bug fix, rename ports (old) 29.03.2018
+ v1.3d bug fix 30.03.2018
+ v1.3e fix issue L2TP UDP port 1701

old version 1.1:
+ v1.1a - added r80.xx ports 16.03.2018
+ v1.1b - bug in drawing fixed 17.03.2018
+ v1.1c - add RSA, TACACS, Radius 19.03.2018
+ v1.1d - add 900, 259 Client-auth - deleted od 4.0 ports 20.03.2018
+ v1.1e - add OPSEC -delete R55 ports 21.03.2018
+ v1.1f - bug fix 22.03.2018
+ v1.1g - bug fix - add mail smtp -add dhcp - add snmp 25.03.2018

[HeikoAnkenbrand]

Now with cloud update!

[Rudi]

Hello @HeikoAnkenbrand 

great job!

[HeikoAnkenbrand]

add all cloud ports

[HeikoAnkenbrand]

 Now version 1.7a with R81 EA update.

[Johnny_Wong]

Thanks for your update Heiko but I can't locate where download with it. The link provided above is v1.5 still. 

[HeikoAnkenbrand]

Thanks @Johnny_Wong,

The pdf is version 1.6. I just did not set the version in the PDF correctly. I will change this in the next days.

[Will_H]

Port 18264 missing for CA Authority from Gateway to Management 

[HeikoAnkenbrand]

Hi @Will_H,

I will add this in version 1.7c.

[Janosch]

Nice port overview.

I noticed that port 18210 is missing in the overview.

[balder_skoeld]

Hi @HeikoAnkenbrand 

great job!

[H_W]

@HeikoAnkenbrand 

great job

[onur]

job

[nils_alfer]

Is an overview also available from Check Point?

[nils_alfer]

@HeikoAnkenbrand nicely done!

[JozkoMrkvicka]

Port udp/260 is used for cpsnmpd (related to SNMPv1).

[balder_skoeld]

👍🏻

[Sven_Glock]

Found a missing link: When using "open shell" action from SmartConsole on a gateway an ssh connection will be established from management to the selected gateway.

Thanks for keeping the nice diagraph alive!

Cheers

Sven

[HuseinS]

Great job

[charlie_h]

good port summary

[Harro]

Nice

[charlie_h]

Nice overview!

[Infinigate_Sup]

Nice port overview!

[James_A]

great port collection

[TimC]

Can I use this to study for CCSE?

[Reinhard_G]

Yes, some questions to ports are in the exam.

[Support_CH]

Add port 8117 for Azure ClusterXL

LB <> ClusterXL

[Hammar]

Please add Port 8117 for Azure ClusterXL <> Azure Load Balancer traffic.

[MMiller]

nice content

[OLE]

nice thanks

[HeikoAnkenbrand]

Update for R81.10 EA