Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Alex-
Leader Leader
Leader

R80.40 VSX - Issues with routed

Everything in R80.40 Take 94, VSX + SMS.

It seems I keep on hitting issues with the routed process in R80.40 and VSX. I already reported here an issue when routing would stop for few minutes then start again, then I recently had a couple of other issues.

First, a route would start getting dropped by anti-spoofing when nothing changed routing-wise, even the accept and subsequent drop logs show the same inbound interface for the flow. Removing and re-entering the static route solved the issue.

Recently, I had dhcp relay on some interfaces which stopped working apparently randomly. VSLS the affected VS solves the issue.

There are entries in /var/log/routed_messages_vs.<x> and I have a case open, I wonder if others have encountered a similar issue?

It's a new setup so no chance for leftovers of previous versions. Clean install and restoration in VSX cluster didn't help either.

0 Kudos
1 Reply
Wille010
Contributor

Hi Alex,

Any progress on this matter? We experienced the same in T102. We upgraded from R80.20 T118 to R80.40 T120 VSLS. We have opened a TAC case to investigate these issues. At the time of issues we were not able to troubleshoot any further because of business impact but we saw a lot of routeD messages and OSPF was not working.

Regards,

Lesley

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events