Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Zia
Explorer

Performance issues : Loss of packets

 

Hi everyone,

I would like the help of the experts here.

We have 2 firewall (5400 model) HA configured and a HP server that acts as the SMS. All of them run under Gaia R80.10.

Here are my main issues:

-We have severe case of packet loss in all of the interfaces of the active firewall and as a result the network is very slow. 

Thank you in advance for all of your suggestions and helpful tips.

 

 

*********************************************************************

[Expert@Firewall-1:0]# enabled_blades
fw vpn cvpn urlf av appi ips identityServer anti_bot vpn

*********************************************************************

[Expert@Firewall-1:0]# fwaccel stats -s
Accelerated conns/Total conns : 2/1574 (0%)
Accelerated pkts/Total pkts : 118218/167295927 (0%)
F2Fed pkts/Total pkts : 6917099/167295927 (4%)
PXL pkts/Total pkts : 160260610/167295927 (95%)
QXL pkts/Total pkts : 0/167295927 (0%)
*********************************************************************

[Expert@Firewall-1:0]# fw ctl multik stat
ID | Active | CPU | Connections | Peak
----------------------------------------------
0 | Yes | 1 | 823 | 11716
1 | Yes | 0 | 766 | 11359

*********************************************************************

[Expert@Firewall-1:0]# free -m
total used free shared buffers cached
Mem: 7744 7160 584 0 449 3521
-/+ buffers/cache: 3188 4555
Swap: 18394 19 18375

*********************************************************************

[Expert@Firewall-2]# fwaccel stats -s
Accelerated conns/Total conns : 0/32 (0%)
Accelerated pkts/Total pkts : 0/2924244 (0%)
F2Fed pkts/Total pkts : 2924244/2924244 (100%)
PXL pkts/Total pkts : 0/2924244 (0%)
QXL pkts/Total pkts : 0/2924244 (0%)

 

0 Kudos
7 Replies
PhoneBoy
Admin
Admin

I think the output of the "Super Seven" commands would be helpful.
See: https://community.checkpoint.com/t5/General-Topics/Super-Seven-Performance-Assessment-Commands-s7pac...

With most of your traffic hitting PXL (expected because of App Control, IPS, and Anti-Bot being active), some policy optimization may be required.
0 Kudos
Ilya_Yusupov
Employee
Employee

according to your fw ctl multik stat you have only 2 FW instances, can you increase it?

 

0 Kudos
Timothy_Hall
Champion
Champion

Need to see the "Super Seven" outputs as Dameon suggested, especially netstat -ni; my guess is your packet loss can be attributed to RX-DRPs. Also please identify which interface name is used for cluster sync. 

The 5400 is a 2-core system which puts it between a rock and a hard place to some degree, the only possible CoreXL adjustment is to disable it thus producing a 1/1 split of SND/IRQ cores vs. Firewall Worker cores as opposed to your current default 2/2 split which causes cache thrashing on the cores under load due to overlapping functions.

 

Gateway Performance Optimization R81.20 Course
now available at maxpowerfirewalls.com
0 Kudos
HeikoAnkenbrand
Champion Champion
Champion

Hi @Zia,

Could you see RX errors?

# netstat -in

Could you see CPU performance issues (software interruts or hw interrupts)?

# top + key 1

Which network card drivers are you use?

# ethtool -i ethX 

On firewall 1 I can see 95% PXL traffic on firewall 2 I can see only 0% and heavy F2F traffic (100%). I think SecureXL is disabled on firewall 2.  Check SecureXL on FW 2.

# fwaccel stat

Are deamons to be visible they generating high load?

# top

(More see here: Check Point Processes and Daemons)

Regards
Heiko

 

 

 

➜ CCSM Elite, CCME, CCTE
0 Kudos
HeikoAnkenbrand
Champion Champion
Champion

If you use R80.20+ check this:

# fw ctl multik utilize   > shows the CoreXL queue utilization for each CoreXL FW instance

# fw ctl multik print_heavy_conn   > shows the table with heavy connections

➜ CCSM Elite, CCME, CCTE
0 Kudos
Timothy_Hall
Champion
Champion

> On firewall 1 I can see 95% PXL traffic on firewall 2 I can see only 0% and heavy F2F traffic (100%). I think SecureXL is disabled on firewall 2. Check SecureXL on FW 2.

Actually Heiko if Firewall-2 is the standby member in a ClusterXL HA cluster it is normal to see 100% F2F, as all traffic on that system is to and from the standby firewall itself which always goes F2F.  So SecureXL is probably enabled on Firewall-2.

 

Gateway Performance Optimization R81.20 Course
now available at maxpowerfirewalls.com
0 Kudos
HeikoAnkenbrand
Champion Champion
Champion

👍

➜ CCSM Elite, CCME, CCTE
0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events