Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Christian_Wagen
Contributor
Jump to solution

Migration from appliance to open server with identical interface names

Is it possible to continue to use the interface names of an appliance on an open server?

1 Solution

Accepted Solutions
HeikoAnkenbrand
Champion Champion
Champion

On the open server under:

/etc/udev/rules.d/00-OS-XX.rules

from

...NAME="eth0"

to

...NAME="External"

You can cange the interface name from "ethx" to the appliance interface name for example "External".

Then you must reboot the system.

➜ CCSM Elite, CCME, CCTE ➜ www.checkpoint.tips

View solution in original post

4 Replies
HeikoAnkenbrand
Champion Champion
Champion

On the open server under:

/etc/udev/rules.d/00-OS-XX.rules

from

...NAME="eth0"

to

...NAME="External"

You can cange the interface name from "ethx" to the appliance interface name for example "External".

Then you must reboot the system.

➜ CCSM Elite, CCME, CCTE ➜ www.checkpoint.tips
Christian_Wagen
Contributor

I'm at the center this minute. Thanks for the quick help. It worked fine. I'll give you a badge.

Norbert_Bohusch
Advisor

I would recommend to always use the interface names of new appliance/open server, because such things as tinkering with udev-rules and so on are much more trouble (maybe not at first but later), than changing your clish configuration accordingly...

HeikoAnkenbrand
Champion Champion
Champion

Yes, it is possible to change the GAIA Iiterfaces and the topology. I think this way is better. 

But the other way is quick and dirty.

I only use this to reorder the interface if necessary (EthX to MAC).

Regards

Heiko

➜ CCSM Elite, CCME, CCTE ➜ www.checkpoint.tips

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events