MTA on R80.10 VSX

[ILLIA_SYDORENKO]

What correct steps to configure MTA on VSX working on R80.10 for TE and TEX blades?

[PhoneBoy]

I would start here: Mail Transfer Agent (MTA) - FAQ 

[ILLIA_SYDORENKO]

This manual does not contain any information about MTA on VSX gateway on R80.10

[ILLIA_SYDORENKO]

I finded right steps that how to configure MTA on VSX gateway working on Gaia R80.10. Right steps see below:

1. Activate MTA on VS0, via activation TE and TEX blades.

2. On VS0 in MTA policy, install as domain * and as next hop, your real mail server, in Advansed settings of MTA, install listening on All Interfaces, it's need per design.

3. Activate MTA on VS1 for example, install as domain (yourdomain.com) as next hop, your real mail server, in Advansed settings of MTA, install listening on All Interfaces, it's need per design.

4. Install polisy.

[Uri_Lewitus]

Hi Illia 

Thanks for posting this.

This is actually documented in the R80.10 threat prevention admin guide (below) so obviously finding the information was not straight forward thing. How/Where would expect to find such info?