Hi
I'm evaluating my current setup for my outgoing traffic (aka internal users accessing the internet).
I noticed that there is a feature called ISP Redundancy, which would allow me to have two uplinks. But i noticed that various documentations say, that i can't use the redundancy when i have dynamic routing protocols in use.
But if i don't use OSPF to learn the default route, would these feature still clash?
For example, if i either only announce routes (eg a default route into the internal network) or learn smaller routes from other devices (eg 192.168.0.0/24 from some router).
These are the mentioned KBs:
R81.20 ClusterXL Administration Guide
Important - ISP Redundancy is not supported if Dynamic Routing is configured (Known Limitation PMTR-68991).
R81.20 ClusterXL AdminGuide
Known Limitations for Scalable Platforms R80.20SP - R81.20 (Maestro Appliances and Chassis)
PMTR-68991 - Scalable Platforms do not support ISP Redundancy if Dynamic Routing is configured (because the ISP Redundancy feature must create a static default route that overrides the default route created by dynamic routing)
sk148074
Thank you.