Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
BlueGrass
Contributor
Jump to solution

How to setup PPPoE Wan port forward manually?

Dear all,

 

We are running R81.1 Gaia OS for the CP6000 Machine in Standalone mode.

 

And one PPPoE wan is connected to this Firewall with a Dynamic IP address

 

I wonder if I can set up DNAT on the wan interface to port ward the Wan: 12345 TCP to 192.168.1.123: 4444 port ??

 

Please show me the step if we can do that as well

0 Kudos
1 Solution

Accepted Solutions
PhoneBoy
Admin
Admin

What you're talking about is the "Main IP" of the object representing the security gateway.
LocalMachine resolves to the leading IP on each interface of the gateway.
Thus: it should work.

View solution in original post

6 Replies
Chris_Atkinson
Employee Employee
Employee

For the translated source in NAT sometimes you can get away with a host object (0.0.0.0) to pickup the Dynamic address.

Not tried it with DNAT however there is also the "LocalMachine" object.

Are you planning to leverage DynDNS or similar?

CCSM R77/R80/ELITE
0 Kudos
BlueGrass
Contributor

No, DDNS is not an option yet.

 

Actually, we are using Cloud managed Firewall Embedded Gaia, the Local Machine object will be always presented as "100.X.X.X" IP. I am not sure if the "LocalMachine" object will work in this case.

0 Kudos
Chris_Atkinson
Employee Employee
Employee

6000 series are not running embedded Gaia reserved for SMB/spark appliances, please confirm the appliance model?

CCSM R77/R80/ELITE
0 Kudos
BlueGrass
Contributor

Both 

 

1570 and 6000 are also using.

 

0 Kudos
PhoneBoy
Admin
Admin

What you're talking about is the "Main IP" of the object representing the security gateway.
LocalMachine resolves to the leading IP on each interface of the gateway.
Thus: it should work.

BlueGrass
Contributor

Tried and worked, thanks.

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events