Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
rajesh_s
Contributor
Jump to solution

Disable CBC mode cipher encryption and enable CTR or GCM cipher mode

In R77.30  i need  enable the CTR or GCM cipher mode  encryption instead of CBC cipher encryption, Please  some one help me to fix this issue.

1 Solution

Accepted Solutions
PhoneBoy
Admin
Admin

You can change the enabled SSH ciphers in the following files:

  • /etc/ssh/ssh_config
  • /etc/ssh/sshd_config

Look for the Ciphers line and remove the appropriate entries from that line.

Restart the ssh daemon with the command: service sshd restart 

View solution in original post

16 Replies
PhoneBoy
Admin
Admin

Please clarify which part of the product you're asking about as there are several places that use these ciphers and the answer is different for each one.

0 Kudos
rajesh_s
Contributor

Hi Demeon,

Thanks for your response 

The SSH server is configured to support Cipher Block Chaining (CBC) encryption. This may allow an attacker to recover the plaintext message from the ciphertext.

 

0 Kudos
PhoneBoy
Admin
Admin

You can change the enabled SSH ciphers in the following files:

  • /etc/ssh/ssh_config
  • /etc/ssh/sshd_config

Look for the Ciphers line and remove the appropriate entries from that line.

Restart the ssh daemon with the command: service sshd restart 

rajesh_s
Contributor

HI Demeon,

I found the chipper keys  " Ciphers aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes2 "

That is only keys i found in ssh configuration, If i remove those keys, Will i able to access the gateway via ssh?.

0 Kudos
PhoneBoy
Admin
Admin

Assuming you've got ciphers listed that are supported by your SSH client, yes. 

0 Kudos
Bryce_Myers
Collaborator

Do you know of a way to modify this ciphers on Gaia Embedded?

0 Kudos
PhoneBoy
Admin
Admin

Not that I'm aware of.

G_W_Albrecht
Legend Legend
Legend

Look here to be able to see them at least: sk144632: How to see the supported ciphers and HMACs of the SSH protocol on SMB appliances

CCSE / CCTE / CTPS / CCME / CCSM Elite / SMB Specialist
0 Kudos
G_W_Albrecht
Legend Legend
Legend

R77.20.80 for Small and Medium Business Appliances removed unsafe ciphers/HMACs from SSH server supported ciphers/HMACs: hmac-sha1-96, hmac-md5.

Looks like the ciphers are compiled into the dropbear SSH server binary for Embedded systems!

CCSE / CCTE / CTPS / CCME / CCSM Elite / SMB Specialist
0 Kudos
johnnyhinton777
Explorer

DESCRIPTION

The SSH server is configured to support either Arcfour or Cipher Block Chaining (CBC) mode cipher algorithms. SSH can be configured to use Counter (CTR) mode encryption instead of CBC. The use of Arcfour algorithms should be disabled.

RISK

A weak cipher has been detected.

RECOMMENDATION

Configure the SSH server to disable Arcfour and CBC ciphers

 

What is the configuration to disable CBC and enable CTR?

 

Here is what I have on the router now: 

HTTP secure server ciphersuite: 3des-ede-cbc-sha des-cbc-sha rc4-128-md5
rc4-128-sha aes-128-cbc-sha aes-256-cbc-sha dhe-aes-128-cbc-sha
dhe-aes-256-cbc-sha ecdhe-rsa-3des-ede-cbc-sha ecdhe-rsa-aes-256-cbc-sha
ecdhe-rsa-rc4-128-sha

 

0 Kudos
PhoneBoy
Admin
Admin

It would be exactly the same configuration as you would do on a standard OpenSSH, which I assume would start by removing anything that mentions CBC in the name.
The version of OpenSSH in use prior to R80.40 is fairly old, so it may not support newer ciphers that may be suggested.

0 Kudos
vsurresh
Contributor

Hello, thanks for the info.

I just checked both files and there are no Ciphers listed in the sshd_config file. There is, however, a line in the ssh_config file as follows:

Ciphers aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc

What will happen after I removed all the ciphers listed above as all of them are considered weak? Is there a way to add ctr cipher instead? 

Thanks in advance. 
R80.30 Gateways

0 Kudos
Tobias_Moritz
Advisor

This is just the same behavior as on any other Linux/Unix box with OpenSSH, as long as we are not talking about SMB appliances.

ssh_config is for the SSH client.

sshd_config is for the SSH server.

If you you not specify any ciphers in that file(s), the defaults apply.

See defaults/supported ciphers here:

https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solut...

When changing these on versions prior to R81.10, please take care of:

https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solut...

When running at least R80.40, a quite good hardening suggestion would be for example:

KexAlgorithms curve25519-sha256@libssh.org,diffie-hellman-group-exchange-sha256,ecdh-sha2-nistp521,ecdh-sha2-nistp384,ecdh-sha2-nistp256

Ciphers chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes128-gcm@openssh.com,aes256-ctr,aes192-ctr,aes128-ctr

MACs hmac-sha2-256,hmac-sha2-512,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com

HostKeyAlgorithms ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521

Just before hitting the "reply" button, I saw you are on R80.30. Thats sad, because that means you are limited to the possibilities of the very old OpenSSH version CheckPoint uses before R80.40, as PhoneBoy said already. Please see sk165685 for supported ciphers. The list is very short, but you can use ctr and get rid of cbc by specifiying only the ctr ciphers in your Ciphers string:

Ciphers aes128-ctr,aes192-ctr,aes256-ctr

Not sure about Kex, MAC and HostKeyAlgorithms support in R80.30. Its not documented on sk165685 and I do not have access to anything older that R80.40 at the moment to look up myself.

0 Kudos
vsurresh
Contributor

Thanks a lot for taking the time to explain. We are in the process of upgrading to R80.40 but just wanted to fix the cipher issue first 🙂

0 Kudos
rajesh_s
Contributor

 There was no ciphers key in sshd_config file, Just i had below mentioned cipher keys in sshd_config file.

Ciphers aes128-ctr,aes192-ctr,aes256-ctr

MACs hmac-sha1,hmac-ripemd160.

Thanks a lot for your help.

0 Kudos
steve2688
Explorer

Hi All Expert,

I google on the same issue as well but i still not able to solve this, is there any article or youtube channel for me to solve this on disable a CBC and enabled CTR and GCM encryption.

The system i am using is

- windows server 2019

- sFTP server port 22

the finding result is from Nessus scanning

The code is 

70658 - SSH Server CBC Mode Ciphers Enabled

71049 - SSH Weak MAC Algorithms Enabled

153953 - SSH Weak Key Exchange Algorithms Enabled

 

anyone can help?

 

i try to look for this folder but i dont know where to find.

  • /etc/ssh/ssh_config
  • /etc/ssh/sshd_config

 

Regards

Steve2688

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events