DHCP Server on VSX

[JackPrendergast]

Hi,

I am aware of the limitations, but wondering if anyone has done any creative methods on keeping the DHCP server within the Check Point environment whilst running VSX?

I have a customer using VSX - and they are migrating a service across from another vendor than runs DHCP on the their firewall interface.

Can it be enabled on the management server and relay to that? Any tips and tricks on getting it running on VS0 and somehow enabling it? or is it just a no go?

Running R81.10

Thanks

[Chris_Atkinson]

Hi Jack,

I believe R81.20 will include support for DHCP server per VS, you may wish to test this in the EA to see if it suits your requirement.

[dongkieu]

From: 25/01/2022, now is 29/07/2022 still not support yet ?

Anybody can give me some information, i have customer want to using dhcp server on VSX

[Chris_Atkinson · Accepted solution]

Supported when R81.20 (GA) is released in the coming months.

(More participation in the EA program will make this sooner rather than later).

[Pastorello]

I installed R81.20, but it doesn't seem like there is a DHCP Server feature. Also in this article sk79700 is not considered as a feature of R81.20. Did they remove it from the road map?

[Pastorello]

I installed R81.20, but it doesn't seem like there is a DHCP Server feature.

Also in this article sk79700 is not considered as a feature of R81.20.

Did they remove it from the road map?

[Chris_Atkinson]

It's listed in sk173903 - what's new under the heading: Quantum Security Gateway and Gaia > VSX

And present in the VSX admin guide per: Configuring DHCP Server on a Virtual System

https://sc1.checkpoint.com/documents/R81.20/WebAdminGuides/EN/CP_R81.20_VSX_AdminGuide/Content/Topic...