Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
anjalir02
Participant

Correct Interface IPs are not reflecting in drop down option for selecting NAS IP in checkpoint FW.

Recently our mangement IPS changed from extenal (Public IP) to Internal (Private IP)  since connectivity was established through MPLS.  I wanted to update the NAS IP from public to private IP interface. However what i found through FW GUI that in the drop down it does not give me the option to select from the Firewall interfaces. It is showing wrong interface IPs. 

 

I also tried to change the NAS IP through GUI but it is giving me an error as below and i am unable to set the interface address.

"NMSAAA9999  Invalid NAS IP address x.y.z.w" cannot set as NAS IP .

 

FW version is 80.20 

 

Please help. 

 

 

0 Kudos
4 Replies
PhoneBoy
Admin
Admin

What precise screen are you talking about?
Did you update the interfaces on the relevant object in SmartConsole?

0 Kudos
anjalir02
Participant

Hello,

Thank you for reverting.
Please find the snip attached of the screen which I am referring to ( FW GUI ) . In the FW when I am trying to select the NAS IP interface from the drop down. It is not showing me the current FW interfaces. While selecting the NAS IP from drop down we are prompted with all the interface IPs of the FW. However it is not showing the interface IPs when I intend to select from the drop down options.

Yes I had updated the relevant object in the Smart Console (updated the IPs).

 

0 Kudos
Maarten_Sjouw
Champion
Champion

Which Model Check Point is this, does this happen to be a 1500?

Regards, Maarten
0 Kudos
anjalir02
Participant

Hello,

 

Thank you for replying. It is checkpoint Model 5800 .

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events