Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Wolfgang
Authority
Authority

ClusterXL none monitored interface

Hello CheckMates,

there was a possibility in R77.30 to define a ClusterXL interface as private none monitored. 

topology_R77.30.png

This interface was then excluded from all availability tests of the cluster (sending CCP packets, ping to IPs in subnet etc.).

Under R80.xx this is gone only private is available and this interface will be monitored:

topology_R80.30.png

Any ideas how to create a none monitored interface under R80.xx ?

thanks

Wolfgang

3 Replies
PhoneBoy
Admin
Admin

Officially, you have to contact the TAC to get the solution, per:
https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solut...
Why it was removed from the UI, I’m not sure.
HeikoAnkenbrand
Champion Champion
Champion

Hi @Wolfgang,

Maybe this will help.

If there are still unused interfaces on cluster members, they must be added to the$FWDIR/conf/discntd.if configuration file - refer to sk30060.

 

 

➜ CCSM Elite, CCME, CCTE ➜ www.checkpoint.tips
Wolfgang
Authority
Authority

Thanks @HeikoAnkenbrand , that's what I want. We had some problems with the attached switch fabric, but with a "disconnected" interface we can do some troubleshooting without initiating failover.

I'll check if this will be supported with the newer releases, sk article is a little bit old.

Wolfgang

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events