I have 2xCheck Point 6400 Plus clustered and fail to add a new VLAN to an interface.
8 VLANs on that interface are working normally.
I followed the steps in this article sk57100.
I can ping the Box-IPs and the Virutal Interface IP from my client, but in the shell:
'cphaprob -a if' shows 'eth2.40 (P) Status DOWN' on both boxes.
The new VLAN has the highest ID, is monitored and so in SmartConsole I see:
Error: Refer to the Notification and Interfaces tables for information about the problem.
In Notification Table I see 'Local Probing - problem'
I checked article sk171844 and noticed that there is no (!) CCP traffic on that interface.
tcpdump -i eth2.40 port 8116 -> nothing
Why are interfaces DOWN and how can I bring them UP? In Gaia Portal the Link Status is 'Up' and I can ping the interface-IPs as mentioned before. In shell 'set interface IF_NAME state on' or 'ifconfig IF_NAME up' did not help.
Thanks for any ideas 🙂