Checkpoint site2site vpn loadsharing with fortigate

[Patrickc]

Hi All,

The customer has a requirement to set up a site-to-site VPN between HQ and Branch, creating two VPN tunnels and configuring them in load sharing mode. The devices are as follows:
HQ: Check Point
Branch: FortiGate

1. Is this achievable? If not, can it be configured as High Availability instead?
2. Are there specific configuration steps available?

Thanks.

[the_rock]

This post may help.

Andy

https://community.checkpoint.com/t5/Security-Gateways/IPSec-VPN-Load-Sharing/td-p/77650