Change cloning group features with a script

[oconnork]

Hello Team,

Please could you help, I don't know how to change a cloning group feature from the Multidomain server ? 

When i do the following : 

 $CPDIR/bin/cprid_util -server <IP_address_of_Security_Gateway> -verbose rexec -rcmd /bin/clish -s -c 'set config-lock on override'

 $CPDIR/bin/cprid_util -server <IP_address_of_Security_Gateway> -verbose rexec -rcmd /bin/clish -s -c 'set 'cloning-group-management on'

 $CPDIR/bin/cprid_util -server <IP_address_of_Security_Gateway> -verbose rexec -rcmd /bin/clish -s -c 'delete allowed-client host ipv4-address x.X.X.X'

I have this error :  This Command is only available in Cloning Group Mode, please login as cadmin in order to use it

It seems the 'set cloning-group-management on' run before doesn't work.

Do you please have any advice on how to work around this problem ? 

[PhoneBoy]

clish -c runs a single command and exits afterwords.
Which means the way you're doing this won't work.
You need to put the relevant commands in a script and run clish against that script instead. 

[oconnork]

Well actually this commands is already within a script and usually it works well as long as I don't need to be in a specific mode like the cloning group mode. 

Can you please advise how I could make multiples commands in one session ? 

I have read about the command start transaction/commit. I will try this way and let you know the results. 

[PhoneBoy]

Instead of making three separate calls to clish as you are doing now, which literally creates three separate sessions, you will make a single call.
That single call will be something like: clish -f scriptfile
The script file will contain all the necessary commands and will be run in a single session.

[oconnork · Accepted solution]

Many thanks @PhoneBoy 

The solution was to create a script from mds to the firewall, Run the remote script and remove the script

I used the following commands for that : 

mgmt_cli put-file file-path "/home/admin/" file-name "tmp_commands" file-content @commands --treat-value-as-file-by-prefix @ targets "$1" -s sid.txt`
mgmt_cli run-script script-name "script_firewall" script "clish -f /home/admin/tmp_commands" targets "MyGTW" -s sid.txt`
mgmt_cli run-script script-name "remove_script" script "rm /home/admin/tmp_commands" targets "MyGTW" -s sid.txt`

My commands line are located within the file "commands" which will be write inside file tmp_commands on the firewall MyGTW
The content of the file commands is : 

set cloning-group-management on
delete allowed-client host ipv4-address A.B.C.D
delete allowed-client host ipv4-address A.B.C.D
save config
set cloning-group-management off