I try to setup a lab gateway on my OVH server. But OVH has a rather odd setup.
- External interface has a /32 netmask. For example: 184.108.40.206/32
- You need to setup a host route to the router (220.127.116.11 in this example) based on the interface.
- Then you need to setup the default gateway to the router.
The point is that step 1 and step 2 works on GAIA (R80.10 T421) but the 3rd step does give you no error but it will not actually setup the route.
set static-route 18.104.22.168/32 nexthop gateway logical eth1 priority 1 on
set static-route default nexthop gateway address 22.214.171.124 priority 1 on
Is there a trick to force GAIA to bring up the default gateway?
If I change the subnet mask to /24 it work but ...... OVH goes totally balistic if I configure it that way.
The other trick is to dump the default just on the interface eth1 and that will work as well
The next step is the wizard. It will not accept this netmask.
Did someone work this out with GAIA?
Can Someone from Check Point R&D get a little bit of budget to toy around on OVH and see if they can fix GAYA to work in such a setup?
<< We make miracles happen while you wait. The impossible jobs take just a wee bit longer. >>