SMB 1570 factory defaults

[HansWolf]

Hello,

I got me a 1570 from ebay. The way it looks, it comes from bezeq. There is a corresponding logo on the front. After resetting to factory defaults, there is strangely enough an admin account called bezeqadmin.  I could just delete this admin but I'd prefer to get rid of all corresponding settings. 

Would it be possible to push a new default image like so: https://sc1.checkpoint.com/documents/SMB_R81.10.X/AdminGuides_Locally_Managed/EN/Content/Topics/Rest...

update default-image from current-image preserve-settings yes force yes

I already installed a current image R81_10_07_996001430

Best regards

W

[G_W_Albrecht]

I would do an USB Flash Firmware Upgrade

[the_rock]

Just do what @G_W_Albrecht suggested...he is SMB master.

Andy

[G_W_Albrecht]

Will be hard to get a license and services, though, if you have no access to eval lics...

[HansWolf · Accepted solution]

The unit is for educational purposes only. I can always get and install an eval licence. I would never use a device without proper license for production.

Updating firmware via USB worked so default image is now fw1_vx_dep_R81_10_07_996001430.img. The strange administrator account "bezeqadmin" was stil present after a factory reset.

So I decided to have a look to the console "Gaia Embedded Boot Menu". Delete preset configuration file and Delete branding file did the trick.

[the_rock]

Great job @HansWolf