Multiple local networks

[gerritd]

Hi Guys, I have a question with a checkpoint 730 config I am hoping someone can help.

I have a 730 firewall with primary internet in ( say IP 1.1.1.1 ) , Secondary as a fail over on DMZ port ( say IP 2.2.2.2 )

Local Network is lan 1 ( Say IP 3.3.3.3 ). Now here is where I am stuck, I have another network I need to access from internal and external ( Say IP 4.4.4.4 )

I connected the microtik router on Lan 6 but I can not ping 4.4.4.4 from inside 3.3.3.3. I have assigned Lan6 to 4.4.4.4 but I still cant ping from 3.3.3.3

If I setup a Vlan1 will I be able to have access from 3.3.3.3 to 4.4.4.4 or what is the correct way to do this?

regards

Gerrit

[_Val_]

Update GW topology and FW policy according to the change. 

[gerritd]

Thank you, I am pretty new with the config of this. Some pointers or more in depth explanation would be much appreciated.

[PhoneBoy]

Is the 4.4.4.4 network behind your Mikrotik router?
What IP got assigned to the Mikrotik router when it was connected to the LAN of the 730?
You will need to create a static route for this network on the 730 that points to the IP of the Mikrotik as a next hop.
If that's not the situation, please provide a complete network diagram with IPS and netmasks.

[gerritd]

Hi Guys, Thanks, I will get the info soonest. I am not on site at the moment. I got hold of the company responsable for the microtik . I dont have access to that router so I am relying on the other company.

Yes 4.4.4.4 is vlan configured on the microtik from the details I have so far. 4.4.4.4 is for the voip system. I am thinking of creating port 6 as a vlan 4.4.4.4 and let the 730 handle the voip vlan.

I will send all info as soon as I get it

regards