Harmony SASE lab doc

[the_rock]

Hey guys,

I attached lab doc that my colleague and I are working on for a customer for Harmony SASE. Its not 100% complete yet, since we need to do more BGP testing, but I hope it can help others.

Andy

[the_rock]

Something important to consider...if you are doing BGP through the tunnel, here is the key. So router id can be say 169.254.241.1 (like our lab) and then you create 2 peers say with IP 169.254.240.254 and 169.254.241.254, as it would let you use it as such for redundant tunnels. I attached what I mean.

Andy

[the_rock]

Also, overlay can be used instead of loopback, so say if router ID is 169.254.241.1, peers can be say 169.254.100.254 and 200.254, that works fine. For some reason, though tunnels are up, on CP side they dont show as permanent, just regular, so we will look into it.

Andy