Mobile Access Blade Portal - authentication/session timeout

[cezar_varlan1]

Dear Experts,

I have received a request to allow users to be connected for a longer period of time without re-authentication over the MAB Portal . I am currently using this feature to "reverse proxy" some apps in a secure network to the user network but with some extra authentication. 

The users are complaining that the MAB timeouts their session and they need to re-authenticate after about 1-2 hours. This checks out as i have done the same test. They would like to have around 8 hours timeout. 

It is not clear if the timeout comes from the MAB itself or from the TCP/443 service on the firewall blade. 

Regarding the MAB timeout i have configured 1440 minutes (maximum) timeout allowed but it is highly unclear which applies to the MAB portal as i have found 4 different locations. Which applies to MAB? What else could be causing the session to end so fast (enabled also back-connections, etc.) as i have set all of them to 1440.

Location #1Location #2Location #3Location #4

Thank you,

Cezar

[PhoneBoy · Accepted solution]

All of those places impact specific clients, not the MAB portal itself.
Go to Manage & Settings > Blades > Mobile Access in SmartConsole and click on the SmartDashboard link.
From there, you can configure the timeout for the MAB portal.
Save and close SmartDashboard, publish the session in SmartConsole, install policy.

[Paul_Gademsky]

Do you happen to know where they moved this in R81 when running Unified instead of Legacy?  I had to go back to the SmartDashboard to fix it.  When that goes away, I'd like to know where they moved it.

Thanks,

PG