Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
S_E_
Advisor

SmartConsole Throughput/Sec

Jump to solution

Hi

stupid question.

It looks like that SmartConsole | Traffic | Throughput/Sec shows the transmitted bytes since last reboot of gateway ?

Same for Accepted Packets/Sec

Or what exactly is this value? Do I misinterpret something?

When it states  890 GB Throughput/sec, I have some doubts that this is correct.

 

Mgmt R80.40 / GW R80.30

Regards

0 Kudos
1 Solution

Accepted Solutions
Timothy_Hall
Champion
Champion

What Jumbo HFA are you using, this is a known issue: sk170132: SmartView Monitor shows a very large 'Bytes Throughput' and 'Accepted Packet Rate'

Does cpview show a more realistic throughput number?

"Max Capture: Know Your Packets" Video Series
now available at http://www.maxpowerfirewalls.com

View solution in original post

0 Kudos
2 Replies
Timothy_Hall
Champion
Champion

What Jumbo HFA are you using, this is a known issue: sk170132: SmartView Monitor shows a very large 'Bytes Throughput' and 'Accepted Packet Rate'

Does cpview show a more realistic throughput number?

"Max Capture: Know Your Packets" Video Series
now available at http://www.maxpowerfirewalls.com

View solution in original post

0 Kudos
S_E_
Advisor

Hi,

 

MDS R80.40 T91 

GW R80.30 T191  wrong values

GW R80.40 T91 valid values

cpview on gateways shows Bits/seconds and seems to be valid /correct

So I assume in Smartconsole Bit/seconds is meant and not the volume GByte

 

ok, understood.

Thanks for pointing to direction.

Regards

0 Kudos