use the "ethtool" to check the interface driver and interface speed/duplex.
With the ethtool you can display the version and type of the driver. For example for the interface eth0.
# ethtool -i eth0
With "lspci" you can display the pci slot and more:
# lspci -v
More informations to linux network cards, CPU, memory, SecureXL driver, hd, pci slots and many more can you found in linux "proc" directory:
# more /proc/...
You found more informations to supported network cards (10GBit/s and 1GBit/s) with and without multi queueing in my article or in HCL. Network interfaces must use the driver that supports Multi-Queue. Only network cards that use the igb (1Gb), ixgbe (10Gb), i40e (40Gb), or mlx5_core (40Gb) drivers support the Multi-Queue:
R80.x Performance Tuning Tip – Multi Queue
Use this documentation:
Command Line Interface R80.30 Reference Guide
On a collection of articles to many architecture and performance topics and CLI commands:
R80.x Architecture and Performance Tuning - Link Collection
➜ CCSM Elite, CCME, CCTE