Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
todd
Contributor
Jump to solution

Maestro 140 Uplink topology

Hi Expert,

We just win a project to implement single site Maestro, 2 MHO-140 and 3 SG6600.

From maestro getting started guide, it shows both MHOs is connected to a single switch or a vPC switch.  But our customer environment is a dual layer2 switch and don't support vPC.

Can you help us confirmed MHO Uplink bond interface can operate in Active/Backup mode? And the topology is workable ?

 

Thanks!

Todd

0 Kudos
4 Solutions

Accepted Solutions
Wolfgang
Authority
Authority

Yes active/backup on a bond is possible.

View solution in original post

0 Kudos
the_rock
Legend
Legend

That looks correct to me.

View solution in original post

0 Kudos
the_rock
Legend
Legend

Logically yes, that would be my assumption as well.

View solution in original post

0 Kudos
RickLin
Advisor
Advisor

Yes, it did function just as you say.

If you can want to figure out which uplink interface is active in each bond interface, you can try to use this.

[Expert@XXXXXX-ch01-01:0]# more /proc/net/bonding/bond*| grep Current
Currently Active Slave: eth2-21
Currently Active Slave: eth2-23
Currently Active Slave: eth1-25
Currently Active Slave: eth2-27
Currently Active Slave: eth2-29

 

eth1 is an MHO-1 uplink interface

eth2 is an MHO-2 unlink interface

View solution in original post

0 Kudos
6 Replies
Wolfgang
Authority
Authority

Yes active/backup on a bond is possible.

0 Kudos
the_rock
Legend
Legend

That looks correct to me.

0 Kudos
todd
Contributor

Thank you!

One more Question.

In the attached picture,  when one of the MHO Active uplink is down, will traffic go to the other MHO ? Am I making the right assumption ?

 

Todd

 

0 Kudos
the_rock
Legend
Legend

Logically yes, that would be my assumption as well.

0 Kudos
RickLin
Advisor
Advisor

Yes, it did function just as you say.

If you can want to figure out which uplink interface is active in each bond interface, you can try to use this.

[Expert@XXXXXX-ch01-01:0]# more /proc/net/bonding/bond*| grep Current
Currently Active Slave: eth2-21
Currently Active Slave: eth2-23
Currently Active Slave: eth1-25
Currently Active Slave: eth2-27
Currently Active Slave: eth2-29

 

eth1 is an MHO-1 uplink interface

eth2 is an MHO-2 unlink interface

0 Kudos
todd
Contributor

Hi Rick,

Thank you!  The command is also helpful.

Regards,

Todd

 

0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

 
Upcoming Maestro Events