On Click Command ➜ SmartConsole Extension

[HeikoAnkenbrand]

After about 1200 lines of code, I would like to present you my new "SmartConsole Extention ➜ One Click Commands".

This allows you to execute CLI commands with one mouse click.

Features:
 - Open a cli command in SmartConsole with a mouse click and execute the command on a gateway.
 - Create your own permanent list with 40 commands.
 - Uses a predefined list of with 40 CLI commands.
 - Edit the list at any time with your own commands.
 - The command list will be permanently maintained, even if you close the SmartConsole and open it again.



PS:  You can also write me new commands for the default list in this article, then I will add it if necessary.

Install the extension

1) On SmartConsole, go to Manage & Settings > Preferences > SmartConsole Extensions > +.

2) Enter the web-service manifest URL
https://www.ankenbrand24.de/ex/command.json
and click OK.

Load the predefined list with 40 CLI commands.

3) On SmartConsole, go to Gateways & Servers > Command > Settings

4) Click the  button "Load default Commands"

Execute a CLI command on the gateway with one click.

5)  Move the mouse over the menu field "One CLick".

6) Now select one of the 40 commands to be executed.

Edit a field and enter your command.

7) Click the pencil icon and change your command.

8 ) Confirm the change with the OK button.

PS: The command list will be permanently maintained, even if you close the SmartConsole and open it again.

More about the Extension

SmartConsole extension to execute commands on all gateways and the SMS.

• Execute commands  in  "Expert Mode" and "Expert Mode"
  
• Execute "Expert Mode" and "CLISH" commands on all gateways simultaneously.
  SMB applications are currently not supported.
  
• Command history -> Execute the last 20 commands again.
  
• Status about the success of the action

Here you can find the original article with the extention:
Execute Commands ➜ SmartConsole Extension 

[ChrisAM]

I had spoken with Heiko about this topic in a meeting a few days ago.
Many thanks for the quick implementation of the "One Click" function.

Thanks
Chris

[_Val_]

@HeikoAnkenbrand did you forget how to post directly to ToolBox? 🙂

[HeikoAnkenbrand]

@_Val_ 

I deliberately didn't move it to the toolbox because it's a description.

If I move it to the toolbox, the assignment of the images is lost. Nobody understands what to do anymore.
I would also like to revert to this link in the extention so that users can open it as online help.

The extension itself is in the toolbox:
Execute Commands ➜ Smart Console Extension 

Could you please move it back to the "general topics" section. Otherwise I would have to build the help page on my web server and I would like to avoid that.

THX

[_Val_]

@HeikoAnkenbrand fair enough, it is now back to where it was originally posted.

[HeikoAnkenbrand]

Thanks 👍

[the_rock]

Nice! Does it need mgmt cpstop/cpstart or reboot? I loaded, but dont see the commands, just empy fields...

[HeikoAnkenbrand]

If you go to the following point in the menu, you can load the default commands:

- On SmartConsole, go to Command > Settings
- Click the  button "Load default Commands"

[the_rock]

Got it, thanks!

[JozkoMrkvicka]

Are VSs also supported ?