Who rated this post

After about 1200 lines of code, I would like to present you my new "SmartConsole Extention ➜ One Click Commands".

This allows you to execute CLI commands with one mouse click.

Features:
 - Open a cli command in SmartConsole with a mouse click and execute the command on a gateway.
 - Create your own permanent list with 40 commands.
 - Uses a predefined list of with 40 CLI commands.
 - Edit the list at any time with your own commands.
 - The command list will be permanently maintained, even if you close the SmartConsole and open it again.



PS:  You can also write me new commands for the default list in this article, then I will add it if necessary.

1) On SmartConsole, go to Manage & Settings > Preferences > SmartConsole Extensions > +.

2) Enter the web-service manifest URL
https://www.ankenbrand24.de/ex/command.json
and click OK.

3) On SmartConsole, go to Gateways & Servers > Command > Settings

4) Click the  button "Load default Commands"

5)  Move the mouse over the menu field "One CLick".

6) Now select one of the 40 commands to be executed.

7) Click the pencil icon and change your command.

8 ) Confirm the change with the OK button.

PS: The command list will be permanently maintained, even if you close the SmartConsole and open it again.

SmartConsole extension to execute commands on all gateways and the SMS.

• Execute commands  in  "Expert Mode" and "Expert Mode"
  
• Execute "Expert Mode" and "CLISH" commands on all gateways simultaneously.
  SMB applications are currently not supported.
  
• Command history -> Execute the last 20 commands again.
  
• Status about the success of the action

Here you can find the original article with the extention:
Execute Commands ➜ SmartConsole Extension 

To install SmartConsole Extensions, you can watch this video:

Version:
v2.0    Upgrade to R82+R82.10                                                         28-01-2026
v1.0                                                                                                       26-03-2023