Mgmt /Data Plane separation - question

[Amir_Arama]

Hi,

i have a question. 

so i want to build like out of band mgmt for all our GWs across the country. to on remote branch office which facing mpls router, i want to create new nic and connect it to seperate nic on router, and after than seperate it as mgmt plane.

my question is. what i do regarding out of band of Switches for example in the same remote branch, i thought to create additional interface for the sw oob mgmt, but my question is can i put more the one interface as mgmt plane? and can i route traffic between interfaces of the mgmt plane? because i want to be able to open ssh from my mgmt pc in HQ to the switch mgmt int in remote office, and i want that all traffic will pass through GWs via Mgmt plane interfaces. is that configuration supported? or should i do that differently? thanks!

[Chris_Atkinson]

If you need VRF type behavior to construct your OOB network perhaps look at VSX.

MDPS is about the mgmt of the gateway itself not ancillary devices.

[Amir_Arama]

thx

so what you are saying is i can't put more than one interface on the mgmt plane and use of of interfaces to be gateway for any network that will be seperated from the data plane?

[Chris_Atkinson]

It's not the intent of the feature to be used in this way, please refer sk138672