cancel
Showing results for 
Search instead for 
Did you mean: 
Post a Question

Custom HotFix Installation Procedure

************************************************************************************************

                                     CUSTOM HOTFIX INSTALLATION

************************************************************************************************

 

Please suggest If I am wrong

 

Below procedure is successfully tested by me.

 

File Name: Custom_Hotfix.tgz

 

Now, most of the custom_hotfix installation now we can be done by CPUSE.

 

NOTE: Please check the procedure before doing this, the procedure may vary.

 

Below is the method to achieve this.

PROCEDURE 01

 

STEP 01 : clish> installer import local /var/tmp/ Custom_Hotfix.tgz   (var/tmp location is a example)

 

NOTE: Interactive mode is enabled. Press CTRL + C to exit (this will not stop the operation)

 

STEP 02: After successfully imported.

 

clish> show installer packages (You able to see the all the installed package like Jumbo hotfix, legacy Hotfix,...)

 

STEP 03: clish>installer verify <press TAB> (You able to see the custom hotfix file, you need to select the option base on the custom hotfix number like 1 or 2 or 3 ...)

 

EXAMPLE: clish>installer verify 2

 

NOTE: Interactive mode is enabled. Press CTRL + C to exit (this will not stop the operation)

 

STEP 04: After successfully verified.

 

clish>  installer install <press TAB> (You able to see the custom hotfix file, you need to select the option base on the custom hotfix number like 1 or 2 or 3 ...)

 

EXAMPLE: clish>installer install 2

 

After that: The machine will automatically reboot after install.

Do you want to continue? ([y]es / [n]o / [s]uppress reboot)  y                     (type y)

 

STEP 05: After rebooting verify the Custom_Hotfix installed properly or not.

 

clish> show installer packages   (see the status for confirmation)

(((((((((((((((((((((((((((((((((((((((((((DONE))))))))))))))))))))))))))))))))))))))))))))))))

 

PROCEDURE 02

 

File Name: Custom_Hotfix.tgz

 

STEP 01: Below command is to unzip the Hotfix File.

 

Expert# tar -zxvf Custom_Hotfix.tgz

 

STEP 02: Now run the below script.

 

Expert#./UnixInstallScript

 

Do you want to continue (y/n) ? y

 

Do you wish to reboot your machine (y/n) ? y

((((((((((((((((((((((((((((((((((((((((((((((((((DONE)))))))))))))))))))))))))))))))))))))))))))))

 

#Chinmaya Naik

Network Security Engineer, QOS Technology, INDIA

2 Replies
Admin
Admin

Re: Custom HotFix Installation Procedure

Note that almost no hotfixes going forward will have the legacy installation script but will use CPUSE.

Re: Custom HotFix Installation Procedure

The Steps you have outlined are the Offline Hotfix implementation via CPUSE - CLISH Method.

    sk92449

    (4-B) How to work with CPUSE - How to install a CPUSE package

       (4-B-a-iii) Show / Hide installation instructions in Gaia Clish for Hotfixes

CPUSE Is now able to handle most Legacy Packages, as well, so Clients should always be using CPUSE, as you have outlined above.

This method, or the Gaia Portal - GUI (Software and Updates Section) will work the same for this functionality.

0 Kudos