Why Standby SMS show No communication ?

[todd]

Hi,

My customer standby SMS show " No Communication, Communication with dr-sms failed since ****".

I cannot open smartconsole to this standby sms.

From Active SMS server, standby SMS SIC communication is OK. 　

Is there any possible reason cause this problem ?

Thank you.

Todd

[simonemantovani · Accepted solution]

Hello

did you check if all the services are running on the standby SMS? (cpwd_admin list)

[Martijn · Accepted solution]

Hi,

Is there an error when connecting to the Standby SMS with SmartConsole?
Is there a firewall located between Active and Standby SMS? If so, anything changed there?

Check with tcpdump to see if traffic between servers if flowing as expected.

Regards,
Martijn

[Chris_Atkinson]

Can you ping between the machines, how are the date/time settings is ntp in sync?

[todd]

Hi,

Thank you all.

Both active sms and standby sms are in the same subnet. Time are correct and in sync with ntp.

Checking standby sms cpwd_admin list looks like the same with active sms.

I checked standby sms $FWDIR/scripts/cpm_status.sh and it show failed. So I reboot standby sms. After reboot, standby is back to normal. Nice~

Todd