White Paper - Best Practices and Architecture Recommendations CloudGuard Private IaaS for VMware NSX
This Whitepaper outlines the integration of VMware NSX-T with Check Point CloudGuard to provide Best practices, Use Cases, Architecture diagrams and Zero-Trust approach to enable customers to build the best strategy to Secure Software Defined Data Center according with the business needs.
The Architecture diagrams and different technical topics described in this document taken from VMware, Check Point Software Technologies and different technical Blogs. All information presented in this paper in-order to educate, enable Security and Networking Engineers, Solution Architects and designers who would like to integrate VMware NSX-T and Check Point Software Technologies for advanced security. Readers should be versed in virtualization, network and security design as well Zero- Trust.
For the full list of White Papers, go here.
I'm not 100% sure but it seems that the PDF contains one error on Page 25 within the screenshot for the "Edge services insertion for East - West traffic between Virtual Machines".
While the section is discussing Edge Services Insertion it seems that the CheckPoint policy screenshot underneath is outlined with Service Chaining in the NSX-T mode. I'm certainly not an expert on the NSX-T topic but this one seems a bit odd to me as per what I'm reading through the documentation.
Could you please confirm if this is an error in the PDF ?
I also found a somewhat newer version of this PDF (dated from 2020) on the following link where the same slide exist but on page 26 instead of 25.
Here is the link just in case:
First all, thanks in advance. I read the document yesterday and found the mistake, we really appreciate your feedback.
Stay tuned for updated document and the new release for NSX 3.0 with more content. 🙂