Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
sadad_asdad
Participant

synchronization problem

our ha state is on, but one of the cluster member is down, and the current state of the synchronization is problem, we restart the ha state but is not work.

5 Replies
Daniel_Taney
Advisor

Run a cphaprob -a if on the Gateway and see if there are ClusterXL issues with a specific Interface / VLAN in the cluster. 

R80 CCSA / CCSE
0 Kudos
Reply
sadad_asdad
Participant

hi, I had run this command on the "Down" member, and the result as below show, as we see ,the eth3 is the sync interface exactly.

0 Kudos
Reply
Dmitry_Krupnik
Employee
Employee

Hi,

Also, please check the output of the "cphaprob list" command on the "Down" member.

0 Kudos
Reply
sadad_asdad
Participant

Hi, I run the comand on the "Down" member, and the result as below show:

Registered Devices:

Device Name: Synchronization
Registration number: 0
Timeout: none
Current state: problem
Time since last report: 55975.4 sec

0 Kudos
Reply
Dmitry_Krupnik
Employee
Employee

Hi Sadad,

Tell me please, did this Cluster works before? Did you perform any changes, which can be related to the issue? Which version of GAIA do you use?

I suggest to chandge the mode to broadcast and check syncronization, please take a look at the sk20576.