- Products
- Learn
- Local User Groups
- Partners
-
More
Join Us for CPX 360
23-24 February 2021
Important certificate update to CloudGuard Controller, CME,
and Azure HA Security Gateways
How to Remediate Endpoint & VPN
Issues (in versions E81.10 or earlier)
IDC Spotlight -
Uplevel The SOC
Important! R80 and R80.10
End Of Support around the corner (May 2021)
Hello,
During a recent TAC course I was told we could use the command "listusers" to get an overview of the users connected via VPN to our gateway. Sure enough, this is listed in the Admin guide:
listusers
Description
Shows a list of end-users connected to the Mobile Access Gateway, along with their source IP addresses.
Syntax
listusers |
Example
[Expert@MyGW:0]# listusers --------------------------------- User Name | IP --------------------------------- Tom , 192.168.0.51 **bleep** , 192.168.0.130 Jane , 192.168.0.7 [Expert@MyGW:0]# |
However, in practice I just get an empty table, at every of our customers I log in to.
Any inspiration why this might be? Is there a more specific context in which this command will actually provide decent output?
Yours,
Willem
It might be, you are using Remote Access and not MAB.
Anyhow, here is a summary that might help: https://community.checkpoint.com/t5/General-Topics/Remote-Access-VPN-Short-List-of-Most-Useful-Resou...
There are alternative ways to get user numbers
About CheckMates
Learn Check Point
Advanced Learning
WELCOME TO THE FUTURE OF CYBER SECURITY