i want to remote VPN on one link and site to site IPSEC on separate link

[anukaravintha1]

My setup,

ISP1 - This is for Site to Site VPN

ISP2 - This is also for Site to Site VPN with different peer

ISP2 - This is for remote VPN

Please advice me to do the link selection configuration

[PhoneBoy]

This is typically handled through the Link Selection setting, which will be impacted by whether ISP Redundancy is used or not.
In R82, you can set this per VPN Community in a much more obvious way.
In earlier releases, you will have to do this based on Routing (Calculate based on Network Topology + configuring appropriate routes out ISP2).

For Remote Access (which does it differently), see: https://support.checkpoint.com/results/sk/sk32229