- Products
- Learn
- Local User Groups
- Partners
-
More
Celebrate the New Year
With CheckMates!
Value of Security
Vendor Self-Awareness
Join Us for CPX 360
23-24 February 2021
Important certificate update to CloudGuard Controller, CME,
and Azure HA Security Gateways
How to Remediate Endpoint & VPN
Issues (in versions E81.10 or earlier)
Mobile Security
Buyer's Guide Out Now
Important! R80 and R80.10
End Of Support around the corner (May 2021)
need to announce one specific network to the BGP peer .
Firewall A is connected to Router B and Router C.
default route is pointing to Router C
Firewall A learns about x.x.x.x network via static route . the next hop is Router B.
need to announce the network x.x.x.x to the BGP peer Router C
Hello you have two ways of configuring BGP
Configuring BGP - Gaia Portal
Configuring BGP - Gaia Clish (bgp)
This configuration are part of the blade Advanced Routing .
You can check the full configuration with the Guide Advanced Routing.
You need to export the static route in BGP. You can to do that with a routemap and export that static route to Router C.
can you provide the required commands
Sure. From CLISH
Create export routemap:
set routemap export-bgp id 10 on
set routemap export-bgp id 10 allow
set routemap export-bgp id 10 match network 'x.x.x.x/xx network via static route' all
set routemap export-bgp id 10 match protocol static
Add routemap to bgp statement:
set bgp external/internal export-routemap export-bgp preference 1 on
save config
External/Internal depends on what you're using of course.
Hope this helps.
Cheerz.
Lesley
Hi All,
How to advertise directly connected subnet? I mean a Vlan subnet?
Redistribute the interface to BGP ?
set route-redistribution to bgp-as ASN from interface INTERFACENAME on
About CheckMates
Learn Check Point
Advanced Learning
WELCOME TO THE FUTURE OF CYBER SECURITY