Hi
I've a VSX Cluster ( simple HA beacuse the customer """"doesn't trust"""" VSLS ..... ) with R80.40 Take 180, this node is a 15400 with 24gb ram
This Cluster hosts 29 virtual firewall ; each one is not heavily loaded ; they are limited to 4000 connection but have peaks of 600,
One of them ( VS 22 ) is using a lot of ram compared to the others
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ P COMMAND
5027 admin 0 -20 5858644 4.470g 68604 S 1.0 **19.3*** 18:48.70 2 **fwk22**_dev_0
11572 admin 0 -20 3474088 2.192g 595908 S 5.9 9.4 161:28.40 10 fwk0_dev_0
11558 admin 20 0 674568 658216 466092 S 0.0 2.7 0:00.88 3 fwk_forker
1926 admin 0 -20 1746652 574500 101184 S 1.0 2.4 193:13.77 1 fwk29_dev_0
5003 admin 0 -20 1570108 398056 90040 S 2.0 1.6 26:27.92 2 fwk16_dev_0
5084 admin 0 -20 1553780 381844 89584 S 1.0 1.6 22:25.49 3 fwk20_dev_0
5078 admin 0 -20 1547356 374484 88764 S 1.0 1.5 9:20.74 3 fwk10_dev_0
VS22 is not under heavy load ...
I've tried switching the cluster but the active node start allocating a lot of ram to VS22 ...
the same after a reboot...it start with a normal allocation and slowly increase and increase and increase....two days ago this VS used all the ram ...leaving only 97 MB free ...( I had to reboot the node )
The only active blade on that VS the Firewall Blade ,there are 30 policies and 10 manual nat...nothing strange.
Any advice? thx! 🙂
I forgot to say that even today we had a little use of swap ...almost 170MB,but before the reboot when I had the "97mb situation" it used swap file for almost 2300MB
