Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
Ralf_Schwendner
Explorer

SNMP Traps in Cluster Mode

Hi CheckMates!

We have 2 R80.10 Security Gateways in HA Mode and now want to configure SNMP Traps for these 2 Gateways (for such things as monitoring RAID Status etc.).

Generally it works but we discovered on our Network Monitoring System (that receives the SNMP Traps) that both Gateways send Traps with the virtual Cluster IP as source IP.

Is it possible that the 2 Gateways use their physical IP as source IP for SNMP Traps and not the virtual cluster IP so that our Network Monitoring System can distinguish the trap origin?

Thank you for your ideas...

0 Kudos
3 Replies
S_E_
Advisor

hi, I do not see this issue on R80.30 HA cluster.

Just a guess, is a static No NAT rule an option?

Regards

0 Kudos
StephS
Explorer

Hi,

I don't think this would solve the problem as this is not a NAT issue, rather a cluster feature. The question is if it is possible to set exceptions for the cluster VIP address. I don't know such option. 

Regards

Steph

0 Kudos
Vincent_Bacher
Advisor
Advisor

You may have a look at sk34180 (Outgoing connections from cluster members are sent with cluster Virtual IP address instead of member's Physical IP address)

and now to something completely different - CCVS, CCAS, CCTE, CCCS, CCSM elite
0 Kudos

Leaderboard

Epsum factorial non deposit quid pro quo hic escorol.

Upcoming Events

    CheckMates Events