Create a Post
cancel
Showing results for 
Search instead for 
Did you mean: 
C_M
Contributor
Jump to solution

SNMP, CLI, Power Supply

How do I tell from the CLI if a power supply went down or up and down?

I got an alert from our SNMP monitor that a power supply was down and then shortly after it said it was up. How do I check on the CLI or gui to see the status of the power supplies and if it really went down?

0 Kudos
2 Solutions

Accepted Solutions
_Val_
Admin
Admin

On Check Point appliances only,

  • HostName> show sysenv all
    
    ... ... ...
    Power Supply #1 Down
    Power Supply #2 Up
    
  • [Expert@HostName]# cpstat os -f power_supply
    
    Power Supply
    --------------
    |Index|Status|
    --------------
    |  1  |  Up  |
    |  2  | Down |
    --------------

View solution in original post

0 Kudos
Chris_Atkinson
Employee
Employee

OID .1.3.6.1.4.1.2620.1.6.7.9 (powerSupplyInfo) should get you started

View solution in original post

0 Kudos
5 Replies
JozkoMrkvicka
Mentor
Mentor

On which appliance you are experiencing such issues ?

You should be able to check if PSU went really down/up from LOM interface events.

Kind regards,
Jozko Mrkvicka
0 Kudos
C_M
Contributor

What/where is LOM interface events?

0 Kudos
_Val_
Admin
Admin

On Check Point appliances only,

  • HostName> show sysenv all
    
    ... ... ...
    Power Supply #1 Down
    Power Supply #2 Up
    
  • [Expert@HostName]# cpstat os -f power_supply
    
    Power Supply
    --------------
    |Index|Status|
    --------------
    |  1  |  Up  |
    |  2  | Down |
    --------------
0 Kudos
bob111
Contributor

hey, I also want to monitor power supply with snmp, what is the oid for it?

0 Kudos
Chris_Atkinson
Employee
Employee

OID .1.3.6.1.4.1.2620.1.6.7.9 (powerSupplyInfo) should get you started

0 Kudos