From R80.40 jumbo take 87 the default behaviour is to export flows for all rules.
With reference to sk102041, flow export per rule (requires accounting to be enabled on the rule) can still be configured.
Warning: the clish message (below example is from R81) is wrong. 0 is the default. As per the sk:
"Note: 1 - generate netflow records only for rules with accounting enabled. 0 - generate netflow records for all firewall rules (applicable only for R80.40 JHF T87 and above)."
fw> set netflow fwrule
1: NetFlow Export for all FW rules (default).
0: NetFlow Export only for specific FW rules that
has Accounting enabled in Smart Console.
Can someone from R&D look at this incorrect message (and check other versions)?